Rubber Speed Bump

Short Description:

Rubber Speed Bumps are also called rubber deceleration hills. They are made of rubber materials and have a slope surface. They are often yellow and black in color. They are fixed to road intersections with expansion screws and are safety facilities that can decelerate vehicles. It is set on the roadway or the arc-shaped raised area extending to the entire width of the road surface, and cooperates with the corresponding traffic signs and markings to remind the driver to control the speed of the vehicle.

Send email to us

Product Detail

Product Tags

Product Description

1. Designed according to the principle of the actual contact angle between the tire and the ground during driving; the appearance design is beautiful and reasonable, and the compression resistance is good;

2. The high-strength Rubber speed bump is made of high-strength pressure-resistant rubber, which can withstand 30 tons of pressure;

3. It is firmly fixed on the ground with screws, and will not loosen when the vehicle hits;

4. There are special textures on the end joints to effectively avoid sliding. The specially designed groove stripes on the surface can ensure the anti-skid function in rainy and snowy days; Calligraphy, more conducive to drainage;

5. The international standard warning color is black and yellow, which is particularly eye-catching; the special process ensures that the color is durable and not easy to fade. It has extraordinary performance no matter day or night, attracting the attention of drivers and successfully slowing down;

6. According to the actual requirements, the combination structure is adopted, which can be combined quickly and flexibly. The installation holes can help the correct installation, and the installation is simple and the maintenance is convenient;

7. It is widely applicable and can slow down the vehicle to 5-15 km/h. Deceleration zone is one of the widely used deceleration products. Mainly used in urban crossroads, highway intersections, toll station crossings, entrances to parks and villages, parking lots, gas stations, etc.

Product parameters

Product name	Rubber speed bump
Shell material	Rubber
Color of the product	Yellow and black
Product Size	1000 350 40MM

Note: The measurement of product size will cause errors due to factors such as production batches, tools and operators.

There may be slight chromatic aberrations in the color of product pictures due to shooting, display, and light.

Application

It is mostly used for ramps, school gates, intersections, turns, multi-pedestrian crossings and other dangerous road sections or bridges with potential safety hazards, and mountain road sections with heavy fog and low visibility.

Installation Method

The installation of the deceleration zone is relatively convenient. It usually adopts any combination of standard blocks and advanced internal expansion anchoring technology. It is firmly fixed on the ground with screws. The installation is firm, stable and reliable, and it will not loosen when the vehicle hits.

Deceleration zone installed on asphalt road

1. Arrange the deceleration zones into a straight line (black and yellow alternately), and place a semicircle row end at each end.

2. Use an impact drill to install a 10MM drill bit to drill vertically in each installation hole of the speed bump, with a depth of 150MM.

3. Drive in 150MM long and 12MM diameter long nails to fix it.

Deceleration zone installed on concrete pavement

1. Arrange the deceleration zones in a straight line (black and yellow alternately), and place a semicircle row end at each end.

2. Use a percussion drill to install 14 drill bits to drill vertically in each installation hole of the speed bump, with a depth of 150MM.

Drive in the internal expansion bolt with a length of 120MM and a diameter of 10MM, and tighten it with a 17 hexagonal wrench.

Product details

Durable rubber

Made of exquisite rubber, exquisite materials, bright luster, and strong pressure resistance.

Safe and eye-catching

Black and yellow, eye-catching atmosphere, high-brightness reflective beads can be installed on each end section, reflecting light at night so that the driver can see the location of the deceleration.

Chevron pattern

Herringbone rubber deceleration belts can decelerate the vehicle when passing, and the vehicle passes without impact and noise.

Honeycomb hole design on the back

The back side adopts a honeycomb small hole structure pattern to reduce noise and increase friction.