Mobile road traffic lights are temporary devices used to direct traffic flow at road intersections. They have the function of controlling road traffic signal light-emitting units and are movable. Qixiang is a manufacturer engaged in traffic equipment with more than ten years of manufacturing and exporting experience. Today, I will give you a brief introduction.
Class I signal control units should have the following functions:
1. With yellow flash control function, the frequency of yellow flash signal should be 55 to 65 times per minute, and the ratio of light-emitting unit light-dark time should be 1:1;
2. With manual control function, control the signal phase state;
3. With multi-period control function, provide at least 4 or 8 independent light group outputs, at least 10 periods and more than 10 control schemes should be set, and the schemes should be adjusted according to different weekday types;
4. Should be able to realize automatic time calibration function;
5. With ambient light illumination detection function, send control signals, and realize light reduction function of light-emitting unit;
6. With operation status monitoring, fault monitoring and self-diagnosis functions, after the fault occurs, send fault warning signal;
7. With battery low voltage alarm function, when the battery voltage is lower than the threshold, the alarm information should be sent out through the communication port.
Class II signal control units should have the following functions:
1. They should have all the functions of Class I signal control units;
2. They should have cable-free coordinated control functions;
3. They should be connected to the host computer or other signal control units through the communication interface;
4. They should be able to locate the mobile traffic lights through the Beidou or GPS positioning system;
5. They should have wireless communication functions and should be able to upload the operating status and fault status.
How to set up mobile road traffic lights
1. When setting up the mobile road traffic light for the first time, you need to select the base position according to the actual situation on site;
2. Then you need to fix and ground the base to ensure that the mobile traffic light will not tilt or move;
3. Then you need to make electrical connections to the mobile road traffic light to ensure that each lamp head can operate normally;
4. Finally, adjust the lamp head of the mobile road traffic light to meet the traffic control needs on site.
Precautions for mobile traffic lights
1. Mobile road traffic lights should be set on flat ground and are not allowed to be set on slopes or places with large height differences;
2. Mobile road traffic lights should be kept intact at all times during use to avoid damage or malfunction;
3. In rainy or humid weather, special attention should be paid to the safe use of mobile road traffic lights.
Occasions for the use of mobile road traffic lights
1. Under normal circumstances, mobile road traffic lights are suitable for temporary traffic control, traffic control at construction sites, sports games, large-scale events and other occasions where traffic control is required;
2. Mobile road traffic lights can also be used for traffic control at temporary intersections and traffic control on turning roads.
In situations where traffic control is required, mobile road traffic lights play an indispensable role. Correct setting and use according to the actual situation on site can effectively ensure traffic safety.
Qixiang, as a mobile road traffic light manufacturer, has a complete production line, complete equipment, and is online 24 hours a day. Welcome to consult!
Post time: Apr-14-2025
