1. Prepare cleaning tools
The tools needed to clean traffic signal mainly include: car wash sponge, cleaning agent, cleaning brush, bucket, etc. According to the different lampshade materials, choose different cleaning agents to avoid damage to the lampshade materials.
2. Cleaning steps
Lamp pole
After the traffic signal is installed, it is necessary to strengthen it firmly to ensure that it can withstand the erosion of the natural environment. But when cleaning the signal light, we must consider the problem of the line. If the line problem is caused during the cleaning process, it will be very serious, so this situation will be taken into consideration during production. There is a metal shell box for protection. The lamp pole is cast and galvanized by stainless steel and other metals. The wires are all inside the lamp pole and the underground electric well box. The line position is clear, and the signal light can be cleaned easily.
Battery
Different traffic lights have different cleaning requirements, and different brightness due to different needs. It is different types of different cleaning methods, which are divided into two forms: casting and forging. Castings are generally galvanized and can be washed or wiped with water. Forged ones are made of one-piece and citric acid is used, which is also very effective. However, no matter which cleaning method is used, the safety of the lamp must be ensured and the lamp must not be damaged.
Traffic signal
First, clean the dust and dirt on the surface of the lampshade with clean water.
Add an appropriate amount of detergent to the bucket, soak the brush in the cleaning liquid, and rub the brush to fully absorb the cleaning liquid.
Use a brush to scrub the surface of the lampshade repeatedly, focusing on cleaning areas where dirt accumulates more, such as edges and corners. Be careful not to use too much force to avoid scratching the surface of the lampshade.
Rinse the cleaning liquid on the surface of the lampshade with clean water to avoid leaving any cleaning agent residue.
Use a clean sponge to dry the surface of the lampshade to restore it to a smooth finish.
3. Precautions
a. Safety measures need to be taken to clean traffic signals to avoid accidents of falling from high altitudes. It is recommended to choose a professional cleaning company for cleaning.
b. During the cleaning process, be careful to prevent water from entering the interior of the lamp to avoid electrical failures.
c. Do not use hard objects to wipe the surface of the lampshade during cleaning to avoid scratching the surface of the lampshade.
d. After cleaning, wipe the surface of the lampshade in time to prevent water droplets from remaining and affecting the line of sight.
e. Clean the traffic signal regularly to maintain its finish and visual effect, and improve the safety and smoothness of urban traffic.
4. Preventive measures
In order to avoid frequent cleaning of traffic signals, trash cans can be set up around the signal poles and the garbage in the trash cans can be cleaned regularly.
In short, cleaning traffic signals is a necessary part of urban transportation. Correct cleaning methods and precautions can ensure the safety and smoothness of traffic. In the process of cleaning traffic lights, different methods are used for different parts. However, the popularization and application of intelligent transportation systems nowadays have increasingly higher requirements for hardware that must meet standards. In many cases, no special cleaning methods are required and regular water washing can be used.
Traffic signal factory Qixiang hopes that this article will be helpful to you.
Post time: Mar-25-2025