With the rapid development of cities, the construction planning of urban public infrastructure is also increasing, and the more common ones are traffic sign poles. Traffic sign poles are generally combined with signs, mainly to provide better information prompts for everyone, so that everyone can better follow the corresponding standards. Do you know what aspects of traffic sign poles need special attention? Today signal light pole manufacturer Qixiang will show you all.
The key traffic sign poles are often displayed in the form of single cantilever traffic sign poles, double cantilever traffic sign poles, double-column traffic sign poles, single-column traffic sign poles, traffic sign poles and various poles. Because of the need for large-scale application, the selection of materials for traffic sign poles is not very prominent. Generally, Q235, Q345, 16Mn, alloy steel, etc. are used as key materials. According to different purposes, its relative height is generally between 1.5M and 12M.
1. Single-column traffic sign poles are more suitable for small and medium-sized traffic signs, and multi-column traffic sign poles are more suitable for rectangular traffic signs.
2. Arm-type traffic sign poles are more suitable for installation of column-type traffic sign poles, which are inconvenient; the road is very wide and the traffic flow is large, and large vehicles on both sides of the lane block the vision of small cars on the inner side lane; tourist attractions have regulations wait.
Precautions for installation of traffic sign poles
1. When the traffic sign pole is installed, the signal light pole should not exceed the boundary of the road building, and it is about 25cm away from the edge of the roadway or sidewalk. The distance between traffic signs and the ground should be more than 150cm. If the proportion of small cars on the road is large, the distance can be adjusted correctly. If there are many pedestrians and non-motorized vehicles on the road, the relative height should be higher than 180cm.
2. The traffic signs should be installed before the road is put into use after the reconstruction, expansion and new construction are completed. When the road traffic conditions are different from before, the traffic signs should be installed from the beginning immediately.
If you are interested in signal light poles, welcome to contact signal light pole manufacturer Qixiang to read more.
Post time: May-09-2023
